LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (10 Engine - Crankcase, Suspension 4.0L -- 9YA - Cayenne (9YA)) >> WM, 105519 Removing And Installing Oil Separator (V8 BITURBO) >> Removing Oil Separator >> Removing (Left) Oil Separator

Removing (Left) Oil Separator

WARNING: This page is about a different variant/trim than selected.
CAUTION: Hot components 
  • Risk of burns 
    • → Let hot components cool down.
    • → Wear personal protective gear.

NOTIFICATION 

Dirt and contamination 

  1. Press release buttons on the adapters -1-  and disconnect vent lines -2-  on the (left) oil separator.
    G15211402Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Adapter for oil separator

    Information 

    Screws on the oil separator are permanently connected. If screws are damaged, press the screws out of the oil separator and replace them.

  2. Remove (left) oil separator -1-  .
    Fig 1: Oil Separator Screws Loosening Sequence (Left)
    G15211403Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Oil separator (left)

    1. 2.1  Loosen and unscrew screws -2 to 7-  .
    2. 2.2  Remove (left) oil separator -1-  .