Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| V8: Screw securing air-conditioning compressor support to engine | V8: M8 x 30 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Fastening screws for heat shield on cylinder head cover, inner | M6x 12 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Fastening screws for front part & rear part of heat shield | M6x 12 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Fastening screw securing generator support to engine | M8 x 40 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Screw securing coolant line to engine/transmission | M6 x 16 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screw securing coolant line to engine | M6 | Tightening torque | 9 Nm (6.5 ftlb.) |