LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (4X Chassis - General 3.0L -- 9YA - Cayenne (9YA)) >> WM, 4X00IN Safety Instructions And Information For Carrying Out Repairs On The Chassis >> General Warning Notes >> Working On Vehicles With Psm

Working On Vehicles With Psm

WARNING: This page is about a different variant/trim than selected.
WARNING: Steering-angle sensor not calibrated or calibrated incorrectly 
  • Unexpected vehicle handling 
  • Steering-angle sensor does not function 
  • Malfunction in steering-angle sensor 

    → After working on wheel suspension parts, when replacing the steering-angle sensor, and after changing the wheel alignment values, calibrate the steering-angle sensor using the PIWIS Tester  .

    → Keep the front wheels in straight-ahead position on the measuring platform during calibration.

    → For vehicles with electromechanical steering, also re-teach the electric steering lock settings.

scientia non olet · About LEMON Manuals