LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (19 Engine - Cooling 3.0L -- 9YA - Cayenne (9YA)) >> WM, 196119 Removing And Installing (Engine) Coolant Pipe (V6 Turbo) >> Subsequent Work >> Subsequent Work For Coolant Pipe On Switching Valve

Subsequent Work For Coolant Pipe On Switching Valve

WARNING: This page is about a different variant/trim than selected.
  1. Monoturbo: 

    Install intake distributor centre.

    > 244619 REMOVING AND INSTALLING THE CENTRAL INTAKE DISTRIBUTOR (V6 TURBO)

  2. Biturbo: 

    Install intake distributor centre.

    > 244619 REMOVING AND INSTALLING THE CENTRAL INTAKE DISTRIBUTOR (V6 TURBO)

  3. Install belt pulley.

    > 195319 REMOVING AND INSTALLING BELT PULLEY (V6 TURBO) 

  4. Refill coolant.

    > 193817 DRAIN AND FILL COOLANT (HIGH-TEMPERATURE COOLING SYSTEM) 

scientia non olet · About LEMON Manuals