Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Nut securing holder for additional coolant pump (high-temperature system P2) | Tightening torque | 9 Nm (6.6 ftlb.) | |||
| Double screw for additional coolant pump (high-temperature system P2) | M6 x 14/M6 x 14 | Tightening torque | 9 Nm (6.6 ftlb.) | ||
| Screws securing additional coolant pump (high-temperature system P2) to holder | Tightening torque | 1.5 Nm (1.1 ftlb.) |