LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (19 Engine - Cooling 3.0L -- 9YA - Cayenne (9YA)) >> WM, 193817 Draining And Filling Coolant (High-Temperature Cooling System) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Connect a battery charger.

    > 2X00IN TRICKLE CHARGING 12-VOLT LITHIUM-ION BATTERY

  2. Perform Tester routine Drain coolant  .
    1. 2.1  Switch on ignition, start the PIWIS Tester  and connect it to the vehicle.
    2. 2.2  Start the diagnostic application and select Engine electronics (DME)  in the control unit search screen.
    3. 2.3  Switch to the Maintenance/repairs  menu item, select the function Work on the high-temperature cooling system  and press F12 to confirm your selection.
    4. 2.4  Select the procedure for draining and filling coolant  and follow the instructions on the Tester.
    5. 2.5  Switch off ignition and remove the PIWIS Tester  .
  3. Remove battery charger.
  4. Disconnect the battery/vehicle electrical system.

    > 270619 REMOVING AND INSTALLING VEHICLE ELECTRICAL SYSTEM BATTERY

  5. Open the cap on the coolant reservoir.
  6. Screw adapter K65  from > 9696 - filling device onto the coolant reservoir.
scientia non olet · About LEMON Manuals