LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (17 Engine - Lubrication 4.0L -- 9YA - Cayenne (9YA)) >> WM, 170519 Removing And Installing Oil Pressure Switch (V8 BITURBO) >> Removing Oil Pressure Switch

Removing Oil Pressure Switch

WARNING: This page is about a different variant/trim than selected.
CAUTION: Hot components 
  • Risk of burns 
    • → Let hot components cool down.
    • → Wear personal protective gear.
  1. Unscrew screws -1-  and remove heat shield -2-  .
    G15211696Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Heat shield on oil pressure switch

  2. Release and disconnect electric plug connection for oil pressure switch -1-  .
    G15211697Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Electric plug connection for oil pressure switch

  3. Collect emerging engine oil.
  4. Unscrew oil pressure switch -1-  using > T40175 - articulated wrench  and guide it up and out.
    G15211698Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Oil pressure switch