LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (17 Engine - Lubrication 4.0L -- 9YA - Cayenne (9YA)) >> WM, 170419 Removing And Installing Oil-Pressure Sender (V8 BITURBO) >> Installing Oil-Pressure Sender

Installing Oil-Pressure Sender

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Replace oil-pressure sender.
    2. 1.2  Screw in and tighten oil-pressure sender using > T40363 - socket wrench, a/f 24  .

      > Tightening torque 20 Nm (15 ftlb.) 

scientia non olet · About LEMON Manuals