Subsequent Work
WARNING: This page is about a different variant/trim than selected.
- Install oxygen sensor.
> Removing and installing oxygen sensor upstream of catalytic converter (V6 monoturbo)
- Install intake manifold.
> 212419 REMOVING AND INSTALLING INTAKE MANIFOLD (V6 MONOTURBO)
- Install pressure pipe.
> Removing and installing pressure pipe (V6 monoturbo)
- Add coolant and check for leaks.
> Draining and filling coolant
- Install connecting piece.
- Install air cleaner housing.
> Removing and installing air cleaner housing
- Checking engine-oil level.
> Checking engine-oil level