LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (27 Starter, Power Supply, Cruise Control 3.0L -- 9YA - Cayenne (9YA)) >> WM, 278519 Removing And Installing Control Unit For Distance Measuring Sensor >> Installing Control Unit For Distance Measuring Sensor

Installing Control Unit For Distance Measuring Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:

Tighten top fastening screws to >Tightening torque 3 Nm (2 ftlb.)  .

Tighten bottom fastening screws to >Tightening torque 2.5 Nm (1.75 ftlb.)  .

scientia non olet · About LEMON Manuals