LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (37 Automatic Transmission - Actuator, Housing 4.0L -- 9YA - Cayenne (9YA)) >> WM, 373719 Removing And Installing Transmission Housing (Rear) >> Removing Transmission Housing (Rear)

Removing Transmission Housing (Rear)

WARNING: This page is about a different variant/trim than selected.
  1. Secure automatic transmission to the assembly support using > 3311 - hook and support tool  .
  2. Disconnect vent line for transmission housing (rear) -1-  and set it aside.
    G15278908Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Vent line for transmission housing (rear)

  3. Remove transmission housing (rear).
    Fig 1: Transmission Housing Screws Loosening Sequence (Rear)
    G15278909Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Transmission housing (rear)

    1. 3.1  Unscrew and remove screws -15 to 1-  .
    2. 3.2  Carefully loosen the transmission housing (rear) using a rubber hammer and then lift it off.
scientia non olet · About LEMON Manuals