LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (26 Exhaust System 3.0L -- 9YA - Cayenne (9YA)) >> WM, 267619 Removing And Installing Primary Catalytic Converter (V6 MONOTURBO) >> Installing Primary Catalytic Converter

Installing Primary Catalytic Converter

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Fit new seal on exhaust turbocharger/primary catalytic converter flange.
    2. 1.2 Fit new  seal on the primary catalytic converter flange.
    3. 1.3 Position new  V-band clamp.
    4. 1.4 Tighten new  nuts securing primary catalytic converter to catalytic converter.
    5. 1.5 Tighten screw on V-band clamp.
scientia non olet · About LEMON Manuals