Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location |
De... |
Type |
Basic v... |
Toleran... |
Toleran... |
| Bolt support bearing on front axle carrier |
M8 x 45 |
Torque |
20 Nm (14.8 ftlb.) |
|
|
| Engine mount bolt on engine support |
M12 x 1.5 x 70/replace |
Initial tightening |
90 Nm (66.4 ftlb.) |
|
|
| Engine mount bolt on engine support |
|
Final tightening |
+ 90° |
|
|