WM, 175019 Removing And Installing Oil Pan (V6 Turbo): Notes
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw for oil pan | M6 x 18 (16 ea.)/replace, observe tightening sequence! | Initial tightening | 3 Nm (2 ftlb.) | ||
| Screw for oil pan | M6 x 18 (16 ea.)/replace, observe tightening sequence! | Final tightening | + 90° | ||
| Screw for oil guide housing holder | M6 x 16 | Tightening torque | 8 Nm (6 ftlb.) |