LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (17 Engine - Lubrication 3.0L -- 9YA - Cayenne (9YA)) >> WM, 170719 Removing And Installing Oil Temperature Sensor (V6 Turbo) >> Preliminary Work >> Installing Oil Temperature Sensor

Installing Oil Temperature Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Replace sealing ring for oil temperature sensor.
    2. 1.2  Tighten screw for oil temperature sensor.

      > Tightening torque 9 Nm (6.5 ftlb.) 

scientia non olet · About LEMON Manuals