LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (17 Engine - Lubrication 3.0L -- 9YA - Cayenne (9YA)) >> WM, 170519 Removing And Installing Oil Pressure Switch (V6 Turbo) >> Preliminary Work >> Installing Oil Pressure Switch

Installing Oil Pressure Switch

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Replace sealing ring on oil pressure switch.
    2. 1.2  Screw in and tighten oil pressure switch using > T40175 - articulated wrench  .

      > Tightening torque 20 Nm (15 ftlb.) 

scientia non olet · About LEMON Manuals