Installing Rear Handle
WARNING: This page is about a different car, the 2023 Porsche Cayenne, 2022 Porsche Cayenne, 2021 Porsche Cayenne, and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
Screw in screw and tighten to > Tightening torque 2.3 Nm (1.7 ftlb.) .
Screw in screws for armrest and tighten to > Tightening torque 2.3 Nm (1.7 ftlb.) .
Screw in screws for armrest and tighten to > Tightening torque 2.8 Nm (2.1 ftlb.) .
Screw in screws for armrest and tighten to > Tightening torque 2.3 Nm (1.7 ftlb.) .
Screw in screws for armrest and tighten to > Tightening torque 2.8 Nm (2.1 ftlb.) .