LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (70 Linings, Insulation (Coupe) -- 9YB - Cayenne (9YB)) >> WM, 70571903 Removing And Installing A-Pillar Trim Panel (Upper Part) >> Removing A-Pillar Trim Panel

Removing A-Pillar Trim Panel

WARNING: This page is about a different car, the 2023 Porsche Cayenne, 2022 Porsche Cayenne, 2021 Porsche Cayenne, and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Removing A-pillar trim panel (lower part) 

  1. Loosen A-pillar trim panel -1-  in the upper area until retaining clip -2-  is accessible.
    G15240286Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    A-pillar trim panel

  2. Move retaining clip -1-  using a suitable tool -Arrow A-  until bolt -2-  releases retaining clip -1-  .
    G15240287Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Retaining clip on A-pillar trim panel

  3. Unclip A-pillar trim panel -1-  at fixing clips -2-  and remove it.
    G15240288Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    A-pillar trim panel