Installing Cover On Lock Carrier (Rear)
WARNING: This page is about a different car, the 2023 Porsche Cayenne, 2022 Porsche Cayenne, 2021 Porsche Cayenne, and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
- After fitting the cover for the (rear) cover on lock carrier, check whether the lock flap has sufficient clearance from the catch bar when screwing it in.
- If there is not enough clearance, the flap must be moved in axial direction as required.
Information
Check that fixing clips are fitted correctly and are not damaged and replace them if necessary.
- Install in reverse order.