Technical Values
WARNING: This page is about a different car, the 2023 Porsche Cayenne, 2022 Porsche Cayenne, 2021 Porsche Cayenne, and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Rear lid to lid hinge | Tightening torque | 12 Nm (9 ftlb.) | |||
| Nut securing rear lid hinge to bodyshell | Tightening torque | 23 Nm (17 ftlb.) | |||
| Screws securing guide wedge to rear lid | Tightening torque | 6 Nm (4.5 ftlb.) | |||
| Screws securing lower part of rear lid lock to lock carrier | Tightening torque | 21 Nm (16 ftlb.) | |||
| Roof spoiler centre trim to roof (H40) | Gap | Gap dimension | 5.5 mm | + 1.5 mm,- 0.5 mm | |
| Roof spoiler centre trim to roof (H40) | Offset | Gap dimension | - 1.2 mm | + 1.5 mm,- 0.5 mm | |
| Rear apron to rear lid - side (H43_0) | Gap | Gap dimension | 3.5 mm | + 1 mm,- 1 mm | |
| Rear apron to rear lid - side (H43_0) | Offset | Gap dimension | 0.2 mm | + 0.8 mm,- 0.8 mm | |
| Rear apron to rear lid - side (H43_1) | Gap | Gap dimension | 3.5 mm | + 1 mm,- 1 mm | |
| Rear apron to rear lid - side (H43_1) | Offset | Gap dimension | 0.6 mm | + 0.6 mm,- 1.1 mm | |
| Rear apron to rear lid - bottom - handle strip (H44_1) | Gap | Gap dimension | 4 mm | + 1 mm,- 1 mm | |
| Rear apron to rear lid, bottom (H44_2) | Gap | Gap dimension | 4 mm | + 1 mm,- 1 mm | |
| Rear apron to rear lid, bottom (H44_2) | Offset | Gap dimension | 0 mm | + 1 mm,- 1 mm | |
| Rear apron to rear lid, bottom (H44_3) | Gap | Gap dimension | 4 mm | + 1 mm,- 1 mm | |
| Rear apron to rear lid, bottom (H44_3) | Offset | Gap dimension | 0 mm | + 1 mm,- 1 mm |