LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (5X - Body General 9YB) >> WM, 5X00IN23 Replacing Punch Rivets And Penetrated Joints >> Loosening Joint >> Punch And Bottom Die Pairs

Punch And Bottom Die Pairs

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Punch rivet  Pressing punch rivet joints out of two-layered panel joints with restricted access D3 + D5
Pressing punch rivet joints out of three-layered panel joints with restricted access D4 + D5
Pressing punch rivet joints out of two-layered panel joints S4 + D5
Pressing punch rivet joints out of three-layered panel joints S5 + D5
  1. The correct punch and bottom die pair for the punch rivet joint is specified in the table above.
  2. Press out punch rivet using a hydraulic riveting tool > VAS 6790 - Compact Booster  .
    G14346117Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Pressing out punch rivet

scientia non olet · About LEMON Manuals