Installing Rear Lid Seal
WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Install rear lid seal -1-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Rear lid seal
- 1.1
Position gap in the rear lid seal -1-
so that it is centred at the top.
- 1.2
Position vent holes in the rear lid seal -1-
outwards.
- 1.3
Press rear lid seal -1-
onto the body.
- 1.4
Press on rear lid seal -1-
at the rounded areas using > 9513 - puller
.