LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (63 Bumper (Coupe) -- 9YB - Cayenne (9YB)) >> WM, 63571930 Removing And Installing Rear Retaining Strip >> Technical Values

Technical Values

WARNING: This page is about a different car, the 2023 Porsche Cayenne, 2022 Porsche Cayenne, 2021 Porsche Cayenne, and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Screws on retaining strip   Tightening torque 3 Nm (2 ftlb.)    
Screws on retaining strip for tail light   Tightening torque 4 Nm (3 ftlb.)    
Screw on retaining strip for tail light (To side retaining strip) Tightening torque 2.5 Nm (1.75 ftlb.)    
Nuts on centre retaining strip   Tightening torque 4 Nm (3 ftlb.)    
Retaining strip to tail light Outer Gap dimension 8 mm    
Retaining strip to tail light Inner Gap dimension 6 mm    
Retaining strip to tail light Side Gap dimension 6 mm