LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (69 Occupant Protection/Personal Protection (Coupe) -- 9YB - Cayenne (9YB)) >> WM, 695319 Removing And Installing Airbag Triggering Unit >> Install Airbag Triggering Unit

Install Airbag Triggering Unit

WARNING: This page is about a different car, the 2023 Porsche Cayenne, 2022 Porsche Cayenne, 2021 Porsche Cayenne, and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Installing airbag triggering unit 

WARNING: Incorrect handling of safety bolts 
  • Danger of injury 
  • Loss of torque 
    1. Observe specified tightening torques.
    2. Carry out a visual inspection of all re-used parts.

Information 

Transport the airbag triggering unit carefully. Do not shake the airbag triggering unit vigorously and do not drop it or let it fall.

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw on fastening nuts and tighten to > Tightening torque 9 Nm (6.5 ftlb.)  .