Installing airbag sensor on lock carrier
WARNING: This page is about a different car, the 2023 Porsche Cayenne, 2022 Porsche Cayenne, 2021 Porsche Cayenne, and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Incorrect handling of safety bolts
- Danger of injury
- Loss of torque
- Always use new screws or nuts following removal.
- Comply with instructions for repairs.
- Observe specified tightening torques.
- Carry out a visual inspection of parts used.
Information
- Make sure that the airbag sensor is positioned correctly.
- Installation is performed in reverse order. Pay particular attention to the following:
Align airbag sensor on lock carrier with positioning pin in the slot of the lock carrier.
Tighten new fastening screw to > Tightening torque 8 Nm (6 ftlb.) .