LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (69 Occupant Protection/Personal Protection (Coupe) -- 9YB - Cayenne (9YB)) >> WM, 693619 Removing And Installing Adjustment Fitting >> Installing Adjustment Fitting

Installing Adjustment Fitting

WARNING: This page is about a different car, the 2023 Porsche Cayenne, 2022 Porsche Cayenne, 2021 Porsche Cayenne, and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Always replace screws on the three-point seat belt. Micro-self-locking screws must not be treated (greased) or loosened and then screwed on again.

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw in screw and tighten to > Tightening torque 20 Nm (15 ftlb.)  .

    Screw in screw and tighten to > Tightening torque 40 Nm (30 ftlb.)  .

scientia non olet · About LEMON Manuals