1.1
Fit adapter T40395/2
on the roller bearing at the correct side. The chamfer -Arrow-
must be facing the roller bearing.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Adapter T40395/2
1.2
Align adapter -T40395/3-
. The side without the chamfer -Arrows-
points downwards
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Adapter T40395/3
Pull the roller bearing inward at the front -1-
and rear -2-
using the spindle -T40395/1-
. adapter -T40395/2-
and adapter -T40395/3-
as far as it will go by turning the nut -T40395/4-
.