Installing Mounting Saddle
- Installation is performed in reverse order. Pay particular attention to the following:
- 1.1
Tighten brake booster to the pedals.
- > Tightening torque 25 Nm (19 ftlb.)
- > 477019 REMOVING AND INSTALLING BRAKE BOOSTER - on "Installing"
- 1.2
Tighten nuts securing mounting saddle to firewall.
> Tightening torque 8 Nm (6 ftlb.)
- 1.3 Tighten screw securing mounting saddle to retaining frame.
> Tightening torque 20 Nm (15 ftlb.)
- 1.1
Tighten brake booster to the pedals.