| Front brake disc Ø |
|
Dimension |
440 mm |
|
|
| Rear brake disc Ø |
|
Dimension |
410 mm |
|
|
| Front brake disc thickness |
|
Setpoint value |
40 mm |
|
|
| Rear brake disc thickness |
|
Setpoint value |
32 mm |
|
|
| Maximum thickness tolerance of brake discs |
|
Dimension |
0.02 mm |
|
|
| Effective front brake disc Ø |
|
Dimension |
344.6 mm |
|
|
| Effective rear brake disc Ø |
|
Dimension |
340.8 mm |
|
|
| Brake pad area per front wheel |
|
Area |
330 cm2 |
|
|
| Brake pad area per rear wheel |
|
Area |
153 cm2 |
|
|
| Front pad thickness |
Wear limit 2 mm |
Set value |
approx. 9 mm |
|
|
| Rear pad thickness |
Wear limit 2 mm |
Set value |
approx. 11.3 mm |
|
|
| Front and rear brake disc wear limit |
Measure using VAS 6813 Tester. Observe measuring prerequisites. New values/wear values and three measuring points are lasered onto the brake disc hub. Wear value reached: Replace PCCB brake discs on each axle. |
Measured value |
XX/XX<br/>Read off values on the brake disc pot |
|
|
| Maximum thickness tolerance of brake discs |
|
Dimension |
0.02 mm |
|
|
| Maximum lateral runout of brake disc |
|
Dimension |
0.03 mm |
|
|
| Maximum lateral runout of wheel hub |
|
Dimension |
0.03 mm |
|
|
| Maximal lateral runout of brake disc when installed |
|
Dimension |
0.06 mm |
|
|