Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screws for transmission housing (rear) (Step 1) | Replace screws | Tightening torque | 6 Nm (4.5 ftlb.) | ||
| Screws for transmission housing (rear) (Step 2) | Replace screws | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screws for transmission housing (rear) (Step 3) | Replace screws | Torque angle | + 90° | ||
| Screws on transmission housing (rear) (Step 4) | Tightening torque | 47 Nm (35 ftlb.) |