Subsequent Work
WARNING: This page is about a different variant/trim than selected.
WARNING:
Danger of injury and damage from brake fluid!
- Poisonous if swallowed!
- Irritation and damage to skin
- Avoid contact with paint surfaces
- → Store brake fluid in suitable, labelled containers only
- → Wear protective gloves and goggles
- → In the event of contact (eyes or skin), wash immediately with water
- → In the event of contact with paint surfaces, wash off immediately with water - do not wipe off
- Fill in brake fluid.
- 1.1 Fill brake fluid into the brake fluid reservoir until the brake fluid level is between MIN and MAX.
- 1.2 Remove any emerging brake fluid immediately using suitable aids; clean affected components with water and dry them.
- Install cowl panel cover.
> Removing and installing cowl panel cover