Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Bleeder screw on front brake calliper (grey cast iron) | M10 x 1 thread | Tightening torque | 14 Nm (10.5 ftlb.) | ||
| Bleeder screw on front brake calliper (PSCB/PCCB) | M10 x 1 thread | Tightening torque | 20 Nm (15 ftlb.) | ||
| Bleeder screw on rear brake calliper (grey cast iron/PSCB) | M10 x 1 thread | Tightening torque | 14 Nm (10.5 ftlb.) | ||
| Bleeder screw on rear brake calliper (PCCB) | M10 x 1 thread | Tightening torque | 14 Nm (10.5 ftlb.) |