LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (66 Exterior Equipment (Coupe) -- 9YB - Cayenne (9YB)) >> WM, 667919 Removing And Installing Rear-View Mirror Housing (Lower Part) >> Installing Rear-View Mirror Housing (Lower Part)

Installing Rear-View Mirror Housing (Lower Part)

WARNING: This page is about a different car, the 2023 Porsche Cayenne, 2022 Porsche Cayenne, 2021 Porsche Cayenne, and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten screws on rear-view mirror housing (lower part) to > Tightening torque 1.4 Nm (1 ftlb.)  .

    Tighten screws on trim panel for mirror base to > Tightening torque 1.4 Nm (1 ftlb.)  .

scientia non olet · About LEMON Manuals