Installing Rear Spoiler (Fins)
WARNING: This page is about a different car, the 2023 Porsche Cayenne, 2022 Porsche Cayenne, 2021 Porsche Cayenne, and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
Check that the spoiler fins are aligned correctly with the roof spoiler.
Check that upper part of spoiler fin is fitted securely and correctly.
Tighten screws to the specified tightening torque. > Tightening torque 2.8 Nm (1.8 ftlb.)
Check that the spoiler fins are aligned correctly with the roof spoiler
If necessary: Detach spoiler fins again and adjust and re-fit them.