LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (66 Exterior Equipment (Coupe) -- 9YB - Cayenne (9YB)) >> WM, 661955 Replacing Front Wheel Cover (Sport Design) >> Installing The Front Wheel Cover (Sport Design)

Installing The Front Wheel Cover (Sport Design)

WARNING: This page is about a different car, the 2023 Porsche Cayenne, 2022 Porsche Cayenne, 2021 Porsche Cayenne, and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Installation is performed in reverse order. Pay particular attention to the following:

  1. Prepare bonding surfaces for adhesive tapes.

    > 6X00IN30 WORKING WITH ADHESIVE TAPE AND ADHESIVE PADS

    Information 

    Check fixing clips, retaining clips and expanding clips for damage and replace them if necessary.

    Check that all fixing clips, retaining clips and expanding clips are fitted at the correct position.

  2. Tighten screws to > Tightening torque 1.5 Nm (1 ftlb.)  .