Preparing Components
WARNING: This page is about a different car, the 2023 Porsche Cayenne, 2022 Porsche Cayenne, 2021 Porsche Cayenne, and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
The preparation steps for the individual components are described in detail below, depending on the application.
The following distinction must be made between components:
- Component with cut or pre-applied adhesive bead
- New component without adhesive bead
The following distinction must be made between vehicle flanges:
- Vehicle flange with cut adhesive bead
- Vehicle flange with repair paint finish without adhesive bead
Select the required component preparation according to the application. There may be more than two application types for bonding in certain areas.