| Screws for coolant pipes |
|
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| Screw for lower chain housing cover |
M6 x 25 (19 ea.)/replace aluminium screws with steel screws, observe specified tightening sequence |
Initial tightening |
3 Nm (2 ftlb.) |
|
|
| Screw for lower chain housing cover |
|
Final tightening |
+ 90° |
|
|
| Upper screws on chain housing cover in chain box |
Replace following removal. |
Initial tightening |
3 Nm (2 ftlb.) |
|
|
| Upper screws on chain housing cover in chain box |
Replace following removal. |
Tightening torque |
8 Nm (6 ftlb.) |
|
|
| Upper screws on chain housing cover in chain box |
Replace following removal. |
Final tightening |
+ 90° |
|
|