LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 10 Engine - Crankcase, Suspension 3.0L -- 9YA - Cayenne (9YA) >> WM, 105519 Removing And Installing Oil Separator (V6 Turbo) >> Installing Oil Separator

Installing Oil Separator

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Clean sealing surfaces.
    2. 1.2 Replace seals.
    3. 1.3 Tighten screws for oil separator to > Tightening torque 9 Nm (6.5 ftlb.)  .
scientia non olet · About LEMON Manuals