LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 10 Engine - Crankcase, Suspension 3.0L -- 9YA - Cayenne (9YA) >> WM, 103719 Removing And Installing Torque Support >> Installing Torque Support

Installing Torque Support

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Tighten screw for torque support to > Tightening torque 55 Nm (41 ftlb.)  .
scientia non olet · About LEMON Manuals