LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne Base >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> 21 Exhaust Gas Turbocharging 3.0L -- 9YA - Cayenne (9YA) >> WM, 219019 Removing And Installing Pressure Sensor (V6 MONOTURBO) >> Installing Pressure Sensor

Installing Pressure Sensor

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Replace O-rings.
    2. 1.2  Tighten screw for pressure sensor on charge-air cooler.

      > Tightening torque 5 Nm (3.5 ftlb.) 

    3. 1.3  Tighten screw for pressure sensor behind throttle valve.

      > Tightening torque 5 Nm (3.5 ftlb.) 

scientia non olet · About LEMON Manuals