LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne Base >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> 21 Exhaust Gas Turbocharging 3.0L -- 9YA - Cayenne (9YA) >> WM, 214319 Removing And Installing Charge-Air Cooler (V6 MONOTURBO) >> Installing Charge Air Cooler >> Overview

Installing Charge Air Cooler: Overview

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Tighten screws on charge-air cooler to > Tightening torque 8 Nm (6 ftlb.)  .
    2. 1.2  Tighten screw-type clamps securing pressure hoses to charge-air cooler to > Tightening torque 8 Nm (6 ftlb.)  .
scientia non olet · About LEMON Manuals