Installing Main Wire Harness In Passenger Compartment At The Left
- Installation is performed in reverse order. Pay particular attention to the following:
Tighten fastening nut for ground point at the bottom of the B-pillar to > Tightening torque 9 Nm (6.5 ftlb.) .
Tighten fastening nut for ground point at the roof to > Tightening torque 9 Nm (6.5 ftlb.) .
Tighten fastening nut for ground point at the driver's footwell to > Tightening torque 9 Nm (6.5 ftlb.) .
Tighten fastening nut for ground point at the firewall to > Tightening torque 9 Nm (6.5 ftlb.) .