Technical Values

Location	Description	Type	Basic value
Clamp for anti-roll-bar mount to rear axle housing	Item 2: Internal serration screw, M8 x 25/Always replace screws following removal	Initial tightening	25 Nm (22 ftlb.) (18.4 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Clip on Stabiliser mount
Clamp anti-roll bar mount to rear axle housing	Item 2: Internal multipoint screw M8 x 25/Always replace screw following removal!	Final tightening torque	+ 90°
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Clip on anti-roll-bar mount