| Steering tie rod on rear axle beam/servo motor for rear axle steering (toe eccentric) |
Item 4: Eccentric screw, M12 x 1.5 with eccentric washer and hexagon nut |
Tightening torque |
90 Nm (66 ftlb.) (66.4 ftlb.) |
|
|
| Steering tie rod to wheel bearing housing |
Item 5: Hexagon-head bolt M14 x 1.5 x 100/Always replace screws following removal! |
Initial tightening torque |
100 Nm (73.8 ftlb.) |
|
|
| Front axle carrier on rear body |
Item 5: Hexagon head bolt M14 x 1.5 x 100/Always replace bolts following removal! |
Final tightening torque |
+ 180 (133 ftlb.)° |
|
|