| Spring strut to spring strut fork |
Hexagon-head bolt, M12 x 95 and hexagon nut/always replace bolts and nuts following removal! |
Initial tightening |
40 Nm (30 ftlb.) |
|
|
| Spring strut to spring strut fork |
Hexagon-head bolt, M12 x 95 and hexagon nut/always replace bolts and nuts following removal! |
Final tightening |
+ 180° |
|
|
| Supporting mount to piston rod, steel springs (conventional) |
Hexagon nut, M12 x 1.5 |
Tightening torque |
50 Nm (37 ftlb.) |
|
|
| Supporting mount to piston rod, steel springs (PASM) |
Hexagon nut, M14 x 1.5 |
Tightening torque |
60 Nm (44 ftlb.) |
|
|
| Aligning spring strut |
Angle of bore on spring strut mount with respect to lug on spring strut fork |
Angle |
90° |
|
|