| Anti-roll bar to connecting link (conventional) |
Hexagon-head bolt, M10 x 62 and hexagon nut/always replace bolts and nuts following removal! |
Initial tightening |
40 Nm (30 ftlb.) |
|
|
| Anti-roll bar to connecting link (conventional) |
Hexagon-head bolt, M10 x 62 and hexagon nut/always replace bolts and nuts following removal! |
Final tightening |
+ 90° |
|
|
| Connecting link to spring strut (conventional) |
12 point socket, M10 x 85 and hexagon nut/always replace bolts and nuts following removal! |
Initial tightening |
40 Nm (30 ftlb.) |
|
|
| Connecting link to spring strut (conventional) |
12 point socket, M10 x 85 and hexagon nut/always replace bolts and nuts following removal! |
Final tightening |
+ 90° |
|
|