| Wheel bearing to wheel bearing housing |
Internal serration screw, V.2 x 42/always replace screws following removal! |
Initial tightening |
80 Nm (59 ftlb.) |
|
|
| Wheel bearing to wheel bearing housing |
Internal serration screw, M12 x 42/always replace screws following removal! |
Final tightening |
+ 90° |
|
|
| Drive shaft to wheel hub |
Shouldered bolt, M16 x 1.5 x 72/always replace bolts following removal! |
Initial tightening |
200 Nm (148 ftlb.) |
|
|
| Drive shaft to wheel hub |
Shouldered bolt, M16 x 1.5 x 72/always replace bolts following removal! |
Final tightening |
+ 180° |
|
|
| Upper trailing arm to wheel bearing housing |
Hexagon-head bolt, M10 x 130 and hexagon nut |
Tightening torque |
40 Nm (30 ftlb.) |
|
|