| Lower trailing arm to front-axle carrier |
Item 3: Twelve-point screw M12 x 100 and hexagon nut/always replace screws and nuts following removal! |
Initial tightening |
70 Lower Nm (51.6 ftlb.) |
|
|
| trailing arm to front-axle carrier |
Item 3: Twelve-point screw M12 x 100 and hexagon nut/always replace bolts and nuts following removal! |
Final tightening |
+ 180° |
|
|
| Lower trailing arm to wheel bearing housing, |
Item 4: Hexagon nut M14 x 1.5/always replace nut following removal! |
Tightening torque |
140 Nm (103.3 ftlb.) |
|
|
| Spring strut to spring strut fork |
Hexagon-head bolt, M12 x 95 and hexagon nut/always replace bolts and nuts following removal! |
Initial tightening |
40 Nm (30 ftlb.) |
|
|
| Spring strut to spring strut fork |
Hexagon-head bolt, M12 x 95 and hexagon nut/always replace bolts and nuts following removal! |
Final tightening |
+ 180° |
|
|
| Angle sensor for HBA |
Item 2, 3 |
Tightening torque |
8 Nm (6 ftlb.) |
|
|