LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 Bumper (Wagon) -- 9YA - Cayenne (9YA) >> WM, 637019 - Removing And Installing Trim Frame For Tailpipe Cover >> Installing Trim Frame For Tailpipe Cover

Installing Trim Frame For Tailpipe Cover

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for screw securing trim frame for tailpipe cover to rear bumper: > Tightening torque 3.5 Nm (2.6 ftlb.) 

scientia non olet · About LEMON Manuals