Installing Front Apron

Information 

During installation, make sure that all locking lugs are positioned correctly and have engaged fully. Use a suitable tool to help if necessary.

1. Installation is performed in reverse order. Pay particular attention to the following:

   Tighten fastening screws on top of wing to > Tightening torque 2.5 Nm (1.75 ftlb.)  .

   Tighten fastening screws on lower front end to > Tightening torque 4.5 Nm (3.25 ftlb.)  .

   Tighten fastening screws on upper front end to > Tightening torque 3 Nm (2 ftlb.)  .